Skip to main content
EJNMMI Physics
Download PDF

Erratum to: Compatibility of metal additive manufactured tungsten collimator for SPECT/MRI integration

EJNMMI Physics volume 2, Article number: 27 (2015) Cite this article

The Original Article was published on 18 May 2015

Erratum

Unfortunately, the original version of this article [1] contained an error. The author’s name, ‘Amine M Samoudi’, was spelt incorrectly. This can be found corrected in the author list above.

Reference

  1. Samudi AM, Van Audenhaege K, Vermeeren G, Luc M, Van Holen R, Joseph W. Compatibility of metal additive manufactured tungsten collimator for SPECT/MRI integration. EJNMMI Physics. 2015;2 Suppl 1:A52.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. INTEC, Ghent University/iMinds, Ghent, Belgium

    Amine M. Samoudi, Gunter Vermeeren, Luc Martens & Wout Joseph

  2. ELIS, Ghent University/iMinds, Ghent, Belgium

    Karen Van Audenhaege & Roel Van Holen

Authors
  1. Amine M. Samoudi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Karen Van Audenhaege
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Gunter Vermeeren
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Luc Martens
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Roel Van Holen
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Wout Joseph
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Amine M. Samoudi.

Additional information

The online version of the original article can be found under doi:10.1186/2197-7364-2-S1-A52.

Any correspondence should be addressed to George Loudos, Supplement ‘Proceedings of the 4th PSMR Conference on PET/MR and SPECT/MR’ organizer: gloudos@teiath.gr

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Samoudi, A.M., Van Audenhaege, K., Vermeeren, G. et al. Erratum to: Compatibility of metal additive manufactured tungsten collimator for SPECT/MRI integration. EJNMMI Phys 2, 27 (2015). https://doi.org/10.1186/s40658-015-0131-2

Download citation

  • Published:

  • DOI: https://doi.org/10.1186/s40658-015-0131-2